Typical properties after seven days cure at 25°C and 50% RH.
5. Application:
1) Joint Design
Correct joint design can assure the lifetime of buildings and sealants. To keep the flexibility of the
joints, the minimum width of the joints is 5mm. The depth is 1/2 of the width. The recommended width
of the joint is 80-100% of the width if the width is less than 10mm.
In order to assure the designed movement capability of the sealant, we should use back lining.
Recommended depth of the joint is no less than 5mm.
2) Surface Treatment
The surface should be clean and dry. The concrete placement should be dried for 28 days.
After rainfall, it should be aired for 2-3 days. The water content of the substrates should be lower than
9%. Dryness and cleanness can assure the bonding strength to the substrates.
The surface should be clean without dust, oil or loose layers. Metal surface should be of no oil, rusty
stains. If the surface is with cladding material or protective layer, we suggest test the sample.
3) Applying the sealant
Use the brush to clear the surface to make the joint achieve the above requirement.
For good appearance, adhesive tape can be used to paste on two sides of the joint. The edges of the tape
should be even with the joint edges.
Pierce the nozzle with an appropriatesize at 45°angle. Put the sealant into an applicator gun and
squeeze the trigger uniformly into the joint. The sealant should be filled into the joint and overflow a
bit in order to avoid hollow space in the sealant.
4) Appearance Treatment
Use the scraper and moisten a bit water to press and scrape flat the surface of the sealant. Take off the
adhesive tape. Do not touch the surface of the sealant before within its tack-free time.
6. Packaging:
310ml cartridge, 20 pcs/carton
600ml sausage, 20 pcs/carton
7. Storage and shelf life:
The shelf life of polyurethane sealant is related to the temperature and humidity of the environment.
The recommended storage temperature is 5-25°C, humidity is ＜50% RH. It is strictly prohibited that
The transportation or storage temperature is over 30°C or the humidity is over 80% RH. When stored at
The recommended conditions in original, unopened containers, this product has a shelf life of 9 months.
Note:
The information and recommendations relating to the application and end-use of COMENS’ products
are given in good faith based on COMENS’ current knowledge and experience of the products when
properly stored, handled and applied under normal conditions. This information must on no account be
used as a substitute for necessary prior tests which alone can ensure that a product is suitable for a
given use, due to the practical differences in materials, substrates and actual site conditions. Users are
requested to check that they are in possession of the latest version of this document and COMENS’ is
at their disposal to supply any additional information.